Sartorius Cubis MCA125P Series - Conformity-Assessed Devices; Symbols on the Device

20 Operating Instructions Cubis
®
MCA
Device Description
3.8 Conformity-assessed Devices
Some settings of conformity-assessed models are protected against
userchanges, e.g. “external calibration” for devices in accuracy class II.
Thismeasure is intended to ensure the suitability of the devices for use
inlegal metrology.
3.9 Symbols on the Device
1
Fig. 10: ID label on the device (example)
Pos. Name Description
1 Manufacturer’s
IDlabel
Displays the metrological data
ofthedevice. Conformity-assessed
modelsonly
Symbol Meaning
During operation, parts in the device may be live.
Onlyelectricians may have access to and work on these
parts, such as for maintenance and repairs.