Sartorius Cubis MCA125P Series - Activating Applications and Adding a Task; Activating Applications

Operating Instructions Cubis
®
MCA 87
Operation
8.5 Activating Applications and Adding a Task
8.5.1 Activating Applications
All applications from the QAPP package “Essentials” are
activated thedevice at the factory. Additional applications may
beactivated intheQAPPcenter. These applications and QAPP packages
can be tested for 30 days free of charge, and after that require a license.
Procedure
t Open Task Management.
t Press the [QAPP center] button.
y An overview of all available QAPP packages is displayed.
t Select the desired software application package e.g. pharmaceuticals.
t To scroll through the contents of a displayed QAPP package: Swipe the
contents of the QAPP package upwards or downwards.
t Select the desired QAPP package.
y A list of all the applications contained in the QAPP package is displayed.
t If the selected QAPP package is to be approved with all the applications
it contains:
t Press the [License] button.
y The input field for the license key appears.
t If an additional cost is associated with the QAPP package:
Enterthelicense key in the entry field and press the [OK] button.
t If no additional cost is associated with the QAPP package:
Pressthe[OK] button.
t If an individual application from the displayed QAPP package
istobeactivated:
t Press the desired application.
y A display opens containing details about the selected application.
t Press the [License] button.
y The input field for the license key appears.
t If an additional cost is associated with the application:
Enterthelicense key in the entry field and press the [OK] button.
t If no additional cost is associated with the application:
Pressthe[OK]button.