Sartorius Cubis MCA125P Series User Manual

Operating Instructions Cubis
®
MCA 33
Operating Design
4.11 User Management
4.11.1 User Profiles
In the factory, four user profiles are created for the device. One role
isassigned to each user profile. Each role has rights to operate the device.
The rights assigned to each role depend on which device functions the
userhas to use. User profiles can be adapted.
Additional user profiles, roles, and rights may be activated in the
QAPPCenter.
4.11.2 User Login
The user must log in to the login display with a user profile. Various setting
options and tasks are displayed in the operating display depending on the
user profile and role.
4.12 Weighing and Print Profiles
Weighing and print profiles can be created. These profiles can be assigned
to a task.
Preset profiles can be used in a task. The preset profiles can be adjusted
individually to the application and saved in new profiles for weighing
andprinting.
4.13 Tasks and Applications
Device functions such as weighing or calibration and adjustment are carried
out using tasks. Applications must be assigned to a task.
A task is visible to all users who are approved for this task.
The device is supplied with some freely accessible applications in the
“Essentials” QAPP package which can be used to carry out the most
important functions.
Additional applications can be unlocked via the QAPP Center for a fee.

Sartorius Cubis MCA125P Series Specifications

General

Brand	Sartorius
Model	Cubis MCA125P Series
Category	Laboratory Equipment
Language	English