Operating Instructions Cubis
®
MCA 37
Operating Design
Level 1 Level 2 Level 3 Description
Weighing and
Print Profiles
CSV Spreadsheet (CSV)
onUSB
Display all available print profiles.
Edit,create or delete the print profiles.
PC direct PC direct (USB keyboard
emulation)
Display all available PC direct profiles.
Edit,create or delete the PC direct profiles.
SBI direct SBI print Display all available SBI direct profiles.
Edit,create or delete the SBI direct profiles.
Connections Connectors USB Define the settings for the connected
USBstick.
YDP30-NET Enter the IP | host address and the
parameters for the printer.
FTP, FTPS If this extension has been configured in the
QAPP Center: The connection to the FTP
orFTPS servers facilitates file transfer using
the FTP or FTPS protocol.
Network printer Enter the IP | host address and the protocol
for the network printer.
SMB If the “Windows File Server” extension has
been configured in the QAPP Center:
Theconnection to a Windows file server
facilitates file transfer using a Server Message
Block (SMB protocol).
Network General settings Define the device host name.
Ethernet Display and edit settings for the device’s
Ethernet connection.
Wi-Fi Display and edit settings for the device’s
Wi-Fi connection.
Website |
web services
Website access Determines the settings for the display
ofthe website for the device.
Remote access Define the settings for controlling
thedevice remotely.
Web service password Define the password for the web services.
Certificates Trusted certification
authorities
Display and export the trusted certification
authorities (CA).
Device certificates Display and export the device certificates.
Trust unknown
certification authorities
Specifies the security for unknown
certification authorities.
Interfaces Serial communication
over network
Display and edit the profile for the
Ethernetconnection.
COM-RS232 interface Display and edit the profile for the
RS232connection.
USB-B interface Display and edit the profile for the
USB-Bconnection.