Sartorius FC - Page 102

Interface Description
Line Format (Data Output Format)
You can output the values displayed in
the measured value line and the weight
unit with or without adata ID code
Example: Without data ID code
+ 253 pcs
Example: With data ID code
Qnt + 253 pcs
Configure this parameter in the Setup
menu (Setup: Basic settings: Printout
configuration: Line format).
The output with data ID code has
16 characters; without data ID code,
22 characters.
102
Output Format With 16 Characters
Display segments that are not activated are output as spaces. Characters without a decimal
point are output without a decimal point.
The following characters can be output, depending on the characters displayed on the scale:
Normal Operation
Position 1 2 3 4 5678910111213141516
+ *DDDDDDDD * UUUCRLF
or – ........ ***
or * ********
*: Space
D: Digit or letter
U: Unit symbol
CR: Carriage return
LF: Line feed
Special Codes
Position 1 2 3 4 5678910111213141516
******––******CRLF
or H H
or L L
or C
*: Space
– –: Weight
H: Overload
H H: Overload in checkweighing
L: Underload
L L: Underload in checkweighing
C: Calibration/adjustment
Error Codes
Position 1 2 3 4 5678910111213141516
***Err**/###****CRLF
*: Space
# # #: Error code number