Sartorius FC - Page 35

Display
You can configure the display for your
individual needs.
The contrast can be adjusted in 5 levels:
Contrast
Characters can be displayed in black on
white or vice versa:
Background
You can blank out either the bar graph or
the text line or both
Digit size
10mm + bar graph + text
display
13mm + bar graph
13mm + text display
13mm
You can blank out the display of
application symbols
Application
symbols
isoTST
6
isoTST
6
isoTST
6
isoTST
6
isoTST
6
isoTST
6
Keys
You can assign different functions
to the c key for deleting input
and applications.
When you delete applications, you
can delete either the data stored for
all applications or just selected data.
CF function in
application
When you delete input, you can either
delete all the data input in a field,
or only the last character entered.
CF function for inputs
You can block key functions; you
can choose whether to block all keys
(except e and H) or just the
alphanumeric keys.
Block key functions
Extra Functions
Acoustic Signal
An acoustic signal is emitted when
you press a key. When the key pressed
is allowed, the signal is a single
beep-tone; when it is not allowed,
this is signaled by a double-beep (key
does not initiate a function). In the
Setup menu, you can configure whether
– the acoustic signal should sound (
On)
– the acoustic signal should not sound
(
Off)
Power-On Mode
You can configure the scale so that
when a power supply is connected,
– the scale is off
(
Off/on/standby), or
– the scale switches on automatically
(
Auto on)
You can also configure the scale
to go into the standby mode
(
Off/on/standby) when
it is turned off.
After you turn on the scale, a self-test
of the functions is run (
TEST is
displayed in the text line and the bar
graph is shown)
35