100
Preparation
G Turn on the balance: Press e
> Sartorius logo is displayed
G Select Extra function (F4) or Extra function (F5) in the Setup menu: Press o
G Select Application parameters: press the q soft key 2 +,
then the
O soft key once
G Select Extra function(F4) or Extra function(F5):
press the q soft key 3 + (or 4 +), then the O soft key once
G Select Identification codes
G Confirm Identification codes
Identification Printout Automatic, if configured
codes Once after pressing print, if configured
ο Each time the print key is pressed
Once for M+ function (app.3 memory)
ο = factory setting
see also “Application Parameters (Overview)” in the chapter entitled “Configuration”
G Save settings for the printout: press the o soft key 4 +
G Enter ID name: Select “Printout”: press the q soft key, then the O soft key
G Select “Identification #”: press the q soft key 5 +, then the O soft key once
G Select ID1
G Enter name for ID1 and confirm: use the numeric keys for numbers and/or the
soft keys to enter letters
$ Enter names for
ID2, ID3 and ID4, if desired
G Save settings and exit the Setup menu: press the oo soft key
Example
See next page
To Next Page
Loading...
