101
Example
Include company address and sample lot number on the printout. Each ID line begins with the name.
Print this ID for each net value.
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Extra function (F4): Identification codes
Setup: Input: ID1: Company
Setup: Input: ID2: Location
Setup: Input: ID3: Street
Setup: Input: ID4: Lot
Step Press key(s) (or follow instructions) Display/Output
1. If necessary, turn on the balance e
2. Select “Extra Function (F4)” o
in the Setup menu
q soft key2 +, then O soft key once
q soft key 3 +, then O soft key once
3. Select “Identification codes”
q or Q soft key;
repeatedly, if necessary
4. Confirm “Identification codes”
O soft key; then osoft key 3 +
and exit this menu item
5. Select ID1
q or O soft key
(Printout: Identifier)
q soft key 5 +,
then
O soft key, then q soft key
6. Enter name for ID 1 a ... see also page 37
(in this case: COMPANY and confirm a,
l soft key
To Next Page
Loading...
Need help?
General
