Setup – Application 1 Calculation Decimal places in None
Application (Basic settings) calculated result 1 decimal place
parameters ο 2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
Density Method Density of liquid
ο Buoyancy
Displacement
Pycnometer
Liquid causing ο Water
buoyancy Ethanol
User-definable
Decimal places None
for disp. of vol./ 1 decimal place
density ο 2 decimal places
3 decimal places
4 decimal places
Printout ο None
All data
Differential weighing Weighing sequence* Individual weighing
Consecutive individual weighing
ο Combined weighing
Serial weighing
Tare weighing No
ο Yes
Result with None
decimal point 1 decimal place
ο 2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
Autosave ο Off
values On, first value at stability
On, last value at stability
On, value bet.
70 – 130% at stabil.
Minimum load None
for autosave 10 digits
ο 20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Save statistics ο No
Yes
Air buoyancy correction: See next page
Applications 2 and 3: see following pages
* = Setting can only be changed when the program is initially run and when the Wg.seq. key option is set to “No”
25
Factory setting
To Next Page
Loading...
