Sartorius LA Reference Series User Manual

65
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during alphanumeric input),
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
G Press the
Cal soft key
> See “Calibration/Adjustment”
for further instructions
Toggling to the Next Application
G Press d
> See the section on the
corresponding application program for
further instructions
Setup (setting parameters)
G Press o
> See “Configuration”
for further instructions
Turning Off the Balance
G Press e
> The balance shuts off
Preparation
G Turn on the balance: Press e
> Sartorius logo is displayed
G Select the Density application in the Setup menu: Press o
G Select the
Application parameters: press the q soft key 2+,
then the
O soft key once
G Select
Application 1 (basic settings): press the O soft key
G Select
Density: press the Q or q soft key, repeatedly, if necessary
G Confirm
Density: press the O soft key
Density Method Density of liquid
ο Buoyancy
Displacement
Pycnometer*
Liquid causing ο Water
buoyancy Ethanol
User-definable
Decimals for disp. of None
vol./density 1 decimal place
ο 2 decimal places
3 decimal places
4 decimal places
Printout ο None
All data
ο = factory setting
see also the “Application Parameters (Overview)” in the chapter entitled “Configuration”
G Save settings and exit the Setup menu: press the
oo soft key
* = How to run this application is described in detail in our “Genius ME”. Installation and
Operating Instructions. Request your copy directly from Sartorius or download it from the
Internet (www.sartorius.com; see “download”)

Sartorius LA Reference Series Specifications

General

Brand	Sartorius
Model	LA Reference Series
Category	Scales
Language	English