66
Practical Example
Buoyancy: Determine the Density of Samples of a Solid Using the Buoyancy Method. Reference Liquid: Water.
Settings (changes in the factory settings required for this example):
Setup: App: Application 1: Density
Step Key (or instruction) Display/Output
1. Delete previously stored values c
if necessary
2. Change configurations, if necessary
Param. soft key
3. Position the sample holder
(immersed)
4. Tare the balance w
5. Determine the weight of the
sample in air: place sample
on the weighing pan
6. Store weight value
Wa soft key
7. Determine the weight of the sample in liquid:
place samplein the sample holder
8. Store weight
Wfl soft key
Density of sample is displayed
9. Display volume of sample
Vol. soft key
10. Display weight
Weigh soft key
11. Repeat procedure with next sample, if desired
Start soft key
To Next Page
Loading...
Need help?
General
