Sartorius LMA100P - Create, Delete, and Sort Programs; Create New Program; Delete Program; Sort Programs

Create a New Program
The analyzer will store following drying
programs:
– LMA100P: 300 drying programs
– LMA110S: 60 drying programs
New programs can be created and
stored for routine usage� All drying
program parameters are set as described
in “Edit Current Program” on page
30� When creating a new program, the
parameters will be used of the last pro-
gram to be recalled�
Note
When creating a new program, you will
edit the last program to be recalled and
shown on the Program Menu screen�
However, you will need to give it a new
program name for storing� Therefore,
first choose a program that is most sim-
ilar to your new program to minimize
the amount of changes to make�
To create a new program:
§ From the Program Manage menu press
the 2 key for “Create new program” to
display the Program Menu screen�
§ The program name will be labeled
“New�” Change program to your desired
name�
§ Finish making changes to all program
parameters as desired�
§ Press the Save key to store the new
program in the first available blank
program slot�
Note
Programs will be saved when down-
loading a new software version�
Delete Program
At times you may want to delete
a drying program that you will no
longer need�
To delete a program:
§ From the Program Manage menu, press
the 3 key to go to the Delete screen
showing the list of programs�
§ Type in the number of the program you
want to delete or move the highlight
with the navigation arrow keys and
press the Enter key� The screen will
return to the Program Manage menu�
Sort Programs
Programs can be sorted in two ways
to make them easier to view when
recalling programs:
§ Alphabetical: sorts by alphabetical order
starting with characters, numbers and
then letters�
§ Fill in the blank: removes all the blank
program positions and places programs
in the storage positions starting at 1 in
the same order as before the sort�
To sort programs:
§ From the Program Manage menu, press
the 4 or 5 key� The display will change,
indicating that the analyzer is sorting�
When finished, the display will return to
the Program Manage menu screen�
43