Menu Structure
The set up software is structured according to a series
of menus� The Setup menu lists several topics of
instrument setup� By drilling down into these topics,
sub-menus will allow specific choices to be selected�
See the Setup section for details�
How to navigate in the menu structure:
§ To select a menu and to drill down to more specific
information:
– Press the preceding number key of this listing or
– Use the navigational arrow keys to highlight the
desired listing first, then press the Enter key
§ To return to a preceding menu level, press the arrow
soft key� Subsequent presses will return you to the
Standby screen�
§ To return to the Standby screen, press the bent arrow if
one is available from that screen� To choose a specific
selection option or to enter a value:
A selection can be made by:
– Pressing the preceding number key of this listing, or
– Using the navigational arrow keys to highlight the
desired listing first, then press the Enter key�
§ How to make a numeric input:
– Use the numeric keypad to enter a value fist, then
press the Enter key�
1) Program manage
2) Data log
3) Modify operators
4) Results printout format
5) Time a nd date
6) Communication ports
7) Conserve mode
8) Security
9) Audio & video
0) Module port scan
. ) Service
Setup Menu
09/07/2012 02:14 PM
19
To Next Page
Loading...
