71
Calibration | Adjustment Functions
Calibrate Balance
The balance of the analyzer should be calibrated and
adjusted on installation and then periodically at some
interval consistent with your quality program (one year
is typical)�
LMA100P: The balance may be calibrated and adjusted
using the internal 100g calibration weight or a known
external calibration weight�
LMA110S: The balance may be calibrated manually
with a Known external calibration weight�
The analyzer also allows you to set a calibration interval
that will remind you when calibration is due�
To access the balance calibration and other balance test
features:
§ From the Service menu screen, press the 2 key for
“Calibrate Balance�”
To calibrate using the internal weight only to the
LMA100P:
§ Remove any object from the pan support
§ From the Calibrate balance screen, press the 1 key
for Calibrate internal weight to display the Calibrate
internal screen�
§ The balance will automatically re-zero�
§ The analyzer will automatically activate the internal
calibration and adjustment mechanism�
Calibrate internal
Abort
Performing internal
weight calibratio n
1) Calibrate internal weight*
2) Calibrate external weight
3) Schedule calibration
4) Reproducibility tes t*
Calibrate balance
09/07/2012 02:14 PM
* = only for model LMA100P
To Next Page
Loading...
Need help?
General
