6
RC-A-26/PF-01/T-F2.TIF
RC-A-09.TIF
RC-A-08.TIF
RC-A-01.TIF
RC-A-02.TIF
Date
MC: – Separate day, month and year by pressing the “.” key;
e.g., 1 0 . 0 9 . 9 3
– Confirm by pressing STO –
RC: – Select between day, month and year using or
– Change setting with or
– Store setting with or change to Ident-No. with
Displaying the Hardware and Software Version
Important note: It may be helpful to know the processor version in case you need to communi-
cate with the Service Center.
– Turn the balance off and back on again by pressing the key.
– While all segments are displayed, briefly press the key (MC) or the
key.
– The display shown here on the left appears for about 3 sec.
– The first two digits indicate the hardware generation and the last two the
software version.
– Afterwards. the balance switches back to the normal weight display.
To Next Page
Loading...
