SATO CG2 Series - Page 40

Section 7: Turning On the Power
Page 7-2 CG2 Series Quick Guide
2. Connect the printer to the AC adapter. Connect the AC adapter to the AC power outlet. When connecting
the DC power cord to the printer’s power connector, make sure the DC power cord connector is oriented
properly. When connecting the DC power cord to the printer connector, use one hand to hold the printer
while using the other hand to plug in the cord.
DC input power terminal
(Power connector)
DC input power terminal
(Power connector)
Make sure the at side
of the DC power cord is
facing up.
Plug
DC power cord
Make sure the at side
of the DC power cord is
facing up.
Plug
DC power cord