SATO CG2 Series - Page 48

Section 9: Basic Specifications
Page 9-4 CG2 Series Quick Guide
Label size
Notice regarding the registered trademarks and trademarks of other companies:
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
Model name CG208DT / CG208TT CG212DT / CG212TT
Non-adhesive
paper / Tag
Continuous type
Pitch: 0.35” to 23.74” (9 to 603 mm)
Width: 0.59” to 2.48” (15 to 63 mm)
Cutter type
Pitch: 0.98” to 23.74” (25 to 603 mm)
Width: 0.59” to 2.48” (15 to 63 mm)
Tear-off type
Pitch: 0.59” to 23.74” (15 to 603 mm)
Width: 0.59” to 2.48” (15 to 63 mm)
Continuous type
Pitch: 0.35” to 15.87” (9 to 403 mm)
Width: 0.59” to 2.48” (15 to 63 mm)
Cutter type
Pitch: 0.98” to 15.87” (25 to 403 mm)
Width: 0.59” to 2.48” (15 to 63 mm)
Tear-off type
Pitch: 0.59” to 15.87” (15 to 403 mm)
Width: 0.59” to 2.48” (15 to 63 mm)
Label Continuous type
Pitch: 0.24” to 23.62” (6 to 600 mm)
(Backing paper 0.35” to 23.74” or 9 to
603 mm)
Width: 0.59” to 2.36” (15 to 60 mm)
(Backing paper 0.71” to 2.48” or 18 to
63 mm)
Cutter type
Pitch: 0.87” to 23.62” (22 to 600 mm)
(Backing paper 0.98” to 23.74” or 25 to
603 mm)
Width: 0.59” to 2.36” (15 to 60 mm)
(Backing paper 0.71” to 2.48” or 18 to
63 mm)
Tear-off type
Pitch: 0.47” to 23.62” (12 to 600 mm)
(Backing paper 0.59” to 23.74” or 15 to
603 mm)
Width: 0.59” to 2.36” (15 to 60 mm)
(Backing paper 0.71” to 2.48” or 18 to
63 mm)
Dispenser type
Pitch: 0.87” to 3.94” (22 to 100 mm)
(Backing paper 0.98” to 4.06” or 25 to
103 mm)
Width: 0.59” to 2.36” (15 to 60 mm)
(Backing paper 0.71” to 2.48” or 18 to
63 mm)
Continuous type
Pitch: 0.24” to 15.75” (6 to 400 mm)
(Backing paper 0.35” to 15.87” or 9 to
403 mm)
Width: 0.59” to 2.36” (15 to 60 mm)
(Backing paper 0.71” to 2.48” or 18 to
63 mm)
Cutter type
Pitch: 0.87” to 15.75” (22 to 400 mm)
(Backing paper 0.98” to 15.87” or 25 to
403 mm)
Width: 0.50” to 2.36” (15 to 60 mm)
(Backing paper 0.71” to 2.48” or 18 to
63 mm)
Tear-off type
Pitch: 0.47” to 15.75” (12 to 400 mm)
(Backing paper 0.59” to 15.87” or 15 to
403 mm)
Width: 0.59” to 2.36” (15 to 60 mm)
(Backing paper 0.71” to 2.48” or 18 to
63 mm)
Dispenser type
Pitch: 0.87” to 3.94” (22 to 100 mm)
(Backing paper 0.98” to 4.06” or 25 to
103 mm)
Width: 0.59” to 2.36” (15 to 60 mm)
(Backing paper 0.71” to 2.48” or 18 to
63 mm)