D
David ContrerasSep 4, 2025
What to do if ribbon stock and media are mismatched in SATO CG2?
- MmdavisSep 4, 2025
If the ribbon stock and media are mismatched in your SATO printer, consult with media supplier. Use only SATO-certified media.
To Next PageTo Next PageWhat to do if ribbon stock and media are mismatched in SATO CG2?
If the ribbon stock and media are mismatched in your SATO printer, consult with media supplier. Use only SATO-certified media.
What does warning buffer near full mean on SATO Printer?
A 'warning - buffer near full' message on your SATO printer indicates that the free space for the receive buffer is low. Pause the data transmission on the host side and wait to have enough buffer space.
What to do if SATO CG2 shows minor error cover open?
If your SATO printer displays a 'minor error - cover open' message, it means the cover is not closed properly. Close the cover to resolve this.
How to adjust print speed on SATO Printer?
To correct excessive print speed on your SATO printer, reduce print speed setting or adjust print speed as required.
What does warning ribbon near end mean on SATO CG2 Printer?
A 'warning - ribbon near end' message on your SATO printer indicates that the remaining amount of ribbon is little. Consider ribbon replacement.
How to prevent foreign material on labels with SATO CG2 Printer?
To prevent foreign material on labels when using your SATO printer, use higher quality media or SATO-certified media.
General| Print Resolution | 203 dpi (8 dots/mm) |
|---|---|
| Print Method | Thermal transfer and direct thermal |
| Print Length | Up to 39.37 inches (1000 mm) |
| Memory | 8 MB Flash |
| Media Type | Labels, tags, tickets, and continuous media |
| Media Roll Diameter | 5" (127 mm) O.D. |
| Interfaces | USB, RS232 Serial |
| Optional Interfaces | Ethernet |
| Power Source | AC 100-240V |
| Supported Barcode Types | UPC-A/E |
| Ribbon Type | Wax, wax-resin, resin |
| Operating Temperature | 41 to 104°F (5 to 40°C) |
| Storage Temperature | 14°F to 140°F (-10°C to 60°C) |
