SATO GY412 - Page 116

Section 3: Operation and Configuration
Page 3-88 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
Display Service Mode - Password setting screen
Onscreen
message
Setting password to enter each mode.
Use ↑ and ↓ keys to change setting value and
press ENTER.
Use ← and → keys to move the cursor.
Operation
button
Button Description
↓, ↑ Enters password
←, → Moves the cursor.
ENTER Saves password and goes to the [SERVICE
MODE] screen.
CANCEL Goes to the [SET PASSWORD] screen without
saving password.
FUNCTION Goes to the [SERVICE MODE] screen without
saving password.
0000
PASSWORD NO