SATO GY412 - Page 69

Section 3: Operation and Configuration
GY412 Operator Manual Page 3-41
3.3 LCD MESSAGE DETAILS (cont’d)
3.3.1.7.1 LAN Interface Setting
Display Interface Mode - IP resolution method
Onscreen
message
Selecting IP resolution method.
Use ↑ and ↓ keys to move the cursor and press
ENTER.
The default setting is "DHCP".
[Important] Changed setting becomes effective at
next power-on.
Operation
button
Button Description
↓,↑ Enters setting value.
←, → Moves the cursor.
ENTER "MANUAL" : Saves the setting and goes to the
[RARP SETTING] screen.
"DHCP" : Saves the setting and goes to the
[PORT NUMBER1] screen.
CANCEL Goes to the [INTERFACE PORT] screen without
saving the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
IP RESOLUTION
METHOD
MANUAL
DHCP