SATO GY412 - Page 70

Section 3: Operation and Configuration
Page 3-42 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
Display Interface Mode - RARP setting
Onscreen
message
Enabling and disabling RARP.
Use ← and → keys to move the cursor and press
ENTER.
The default setting is "DISABLE".
[Important] Changed setting becomes effective at
next power-on.
Operation
button
Button Description
↓,↑ Enters setting value.
←, → Moves the cursor.
ENTER "ENABLE" : Saves the setting and goes to the
[SUBNET MASK] screen.
"DISABLE" : Saves the setting and goes to the
[IP ADDRESS] screen.
CANCEL Goes to the [IP RESOLUTION METHOD] screen
without saving setting value.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
RARP SETTING
ENABLE
DISABLE
RARP
S
ETTIN
G
ENA
B
L
E
DI
S
ABL
E