SATO GY412 - Page 80

Section 3: Operation and Configuration
Page 3-52 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
Display Interface Mode - BCC check setting
Onscreen
message
Setting BCC check function.
Use ← and → keys to move the cursor and press
ENTER.
"ENABLE" : BCC check function is ON.
"DISABLE" : BCC check function is OFF.
The default setting is "DISABLE".
This screen is displayed only when "STATUS5" is
selected in [PROTOCOL].
Refer to the Interface Specifications for this func-
tion details.
Operation
button
Button Description
←, → Moves the cursor.
ENTER Saves the setting and goes to the [ONLINE
MODE] screen.
CANCEL Goes to the [ITEM NO CHECK] screen without
saving the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
DISABLE
ENABLE
BCC CHECK