SATO GY412 - Page 85

Section 3: Operation and Configuration
GY412 Operator Manual Page 3-57
3.3 LCD MESSAGE DETAILS (cont’d)
Display Interface Mode - RS-232C parity bit setting
Onscreen
message
Setting RS-232C parity bit.
Use ← and → keys to move the cursor and press
ENTER.
The default setting is "NONE".
[Important] Changed setting becomes effective at
next power-on.
Operation
button
Button Description
←, → Moves the cursor.
ENTER Saves the setting and goes to the [STOP BIT]
screen.
CANCEL Goes to the [BAUDRATE] screen without saving
the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
Display Interface Mode - RS-232C stop bit setting
Onscreen
message
Setting RS-232C stop bit.
Use ← and → keys to move the cursor and press
ENTER.
The default setting is "1BIT".
[Important] Changed setting becomes effective at
next power-on.
Operation
button
Button Description
←, → Moves the cursor.
ENTER Saves the setting and goes to the [CHARACTER
BIT] screen.
CANCEL Goes to the [PARITY BIT] screen without saving
the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
NONE
PARITY BIT
ODD
EVEN
1BIT
STOP BIT
2BIT