SATO M-8485Se - Page 218

FWaaHbbbb Horizontal Line. Prints a horizontal line. Units of measurement are
dots.
5-50
M-8459Se M-8460Se M-8485Se M-8490Se
aa = Width of Hor Line 01 to 99
bbbb = Length of Hor Line 0001 to
0896
0001 to
1216
0001 to
1024
0001 to
1344
FWaabbVccc
Hdddd
Box. Prints a box. For values aa, bbbb, cc, and dddd, see instructions
for horizontal and vertical lines. Units of measurement are dots.
5-50
M-8459Se M-8460Se M-8485Se M-8490Se
aa = Width of Hor
Side
01 to 99
bb = Width of Vert
Side
01 to 99
cccc = Length of Vert
Side
Expanded
0001 to 1424
0001 to 9999
0001 to 2136
0001 to 9999
dddd = Length of Hor
Side
0001 to 0896 0001 to 1216 0001 to 1024 0001 to 1344
FWccVddd Vertical Line. Prints a vertical line. Units of measurement are dots. 5-50
M-8459Se M-8460Se M-8485Se M-8490Se
cc = Width of Vert
Line
01 to 99
dddd = Length of Vert
Line
Expanded
0001 to 1424
0001 to 9999
0001 to 2136
0001 to 9999
FXaaabccc
dddeee
Data Matrix. Sequential Numbering. Prints sequential numbered Data
Matrix 2-D symbols.
aaa = Number of duplicate labels (001-999)
b = Increment or decrement
+ Increment
- Decrement
ccc = Increment/decrement steps (001-999)
ddd = Sequential numbering start position (001-999). Referenced
to left side.
eee = Incremented data length (001-999). Measured from start
position.
5-104
SATO“Se”PrintEnginesPN9001073RevCPageA-4
Appendix A: Command Quick Reference
INSTRUCTION DESCRIPTION PAGE