5 Emulation Mode
237
S84-ex/S86-ex Operator Manual
USER CODE CNTBY
Set the CNTBY code.
The setting range is from 00 to FF (hexadecimal).
Three beeps will sound, indicating error, if the value is identical with other
codes (SOH, STX, CR).
Note
Shows only if CTRL CODE TYPE is set to CUSTOM.
LABEL ROTATION
Set the page orientation of label printing.
• ENABLE: Labels are printed in inverse-portrait orientation. The image
will be printed as 180 degree rotation.
• DISABLE: Labels are printed in normal portrait orientation.
FORMAT ATTRIBUTE
Set the format attribute.
The options are as follows:
• XOR
• TRANSPARENT
• OPAQUE
• INVERSE
PAUSE MODE
Enable or disable the pause mode.
• ENABLE: Enable the pause mode. The printer enters offline mode after
every print job if priority setting is set to LCD. It has the same effect as
<STX>J.
• DISABLE: Disable the pause mode.
To Next Page
Loading...
