2
11063344 • Rev EA • Dec 2012
H1 Axial Piston Pump, Size 045/053, Single
Technical Information
Table of revisions
Date Page Changed Rev
30 Jul, 2009 — First edition AA
Feb 2010 various 14 teeth added BA
Jun, 2010 4-6, 10, 12,
14, 16-17
New EC directive CA
Feb 2011 Various Updated drawings DA
Nov 2012 Various AC added EA
Revisions
Front cover illustrations: F301 557, P003 515
Revision History
Further available literature
Description SD order number
Overview, H1 Axial Piston Pumps, Single and Tandem L1012919
Basic Information, H1 Axial Piston Pumps, Single and Tandem 11062168
Technical Information
H1 Axial Piston Pump, Size 045/053, Single 11063344
H1 Axial Piston Pump, Size 045/053, Tandem 11063345
H1 Axial Piston Pump, Size 060/068, Single 11071685
H1 Axial Piston Pump, Size 069/078, Single 11062169
H1 Axial Piston Pump, Size 089/100, Single 11069970
H1 Axial Piston Pump, Size 115/130, Single 11063346
H1 Axial Piston Pump, Size 147/165, Single 11063347
H1 Automotive Control for Single Axial Piston Pumps 045 - 165 cc L1223856
Complementary Products
External Remote Charge Pressure Filter 11064579
Speed and Temperature Sensor 11046759
Pressure Sensor L1007019
Hydraulic Fluids, Technical Information
Hydraulic Fluids and Lubricants 520L0463
Experience with Biodegradable Hydraulic Fluids 520L0465
Design Guideline for Hydraulic Fluid Cleanliness 520L0467
Application Information
Applications Manual, Section 1, Selection of Driveline Components BLN-9885
Applications Manual, Section 2, Pressure and Speed Limits for Hydraulic Units BLN-9884
Applications Manual, Section 4, Transmission Circuit Recommendations BLN-9886
PLUS+1 COMPLIANT (Electrical Installation)
H1 Electrical Displacement Control (EDC) 11022744
H1 3-position (FNR) Electric Control 11025001
H1 Non-Feedback Proportional Electric (NFPE) Control 11025002
Service Manuals
H1 Axial Piston Pump, Size 045/053, Single 520L0958
H1 Axial Piston Pump, Size 045/053, Tandem 520L0928
H1 Axial Piston Pump, Size 069/078/089/100/115/130/147/165, Single 520L0848
T000 143E
© 2012 Sauer-Danfoss. All rights reserved.
Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material.
Sauer -Danfoss reserves the right to alter its products without prior notice. This also applies to products
already ordered provided that such alterations can be made without a ecting agreed speci cations. All
trademarks in this material are properties of their respective owners. Sauer-Danfoss, the Sauer-Danfoss
logotype, the Sauer-Danfoss S-icon, PLUS+1™, What really matters is inside® and Know-How in Motion™ are
trademarks of the Sauer-Danfoss Group.