Schaerer Coffee Art Plus TouchIT Series

www.schaerer.com Operation
BASCAP_TOUCHIT_EN
V04 | 10.2018
38
► Set the required number of beverages to be displayed in the "Number of beverages per
group" parameter.
• 1 - 9 beverages
• 1 - 12 beverages when without the [DECAF], [2x], [Barista] pre-selection options
► Enter the name in the "Group name" parameter.
► Store an image from the selection list in the "Group button picture" parameter as needed.
► Perform a "restart" by removing the SERVICE card.
► After the restart, reselect the "Configuration" menu with the SERVICE card.
► Open the "Beverage settings" sub-menu.
► Define the beverages in the respective beverage groups.
Configuration example, 4 groups with 6 beverages per group:
 This configuration example enables beverage selection which works in two directions
(Group > Beverage or Beverage > Group).
Option 1: Before beverage selection
The beverage is now selected from the 4 defined groups:
• Selection (1) from beverage groups, e.g. small - medium - large + flavour.
• Selection (2) from beverage page.
• Selection (3) from flavour types.
See also "Configuration" - "Beverage settings".
Configuration of the 1st group (A) should contain all available basic beverages, if possible.
Group A
[Small]
Group B
[Medium]
Group C
[Large]
Group D
[+Flavour]
Espresso Espresso-1 – –
Coffee Coffee-1 – Coffee 1.1.1
Cappuccino Cappuccino-1 Cappuccino-1.1 Cappuccino 1.1.1
Latte macchiato – Latte macchiato-1.1 Latte macchiato- 1.1.1
Chocciato Chocciato-1 Chocciato-1.1 –
CoolMacc – CoolMacc-1.1 CoolMacc- 1.1.1