M
Mitchell HarrisSep 1, 2025
What does 'EEPROM error' mean on Schaerer Coffee Maker?
- CCaitlin DanielsSep 1, 2025
If your Schaerer Coffee Maker displays an 'EEPROM error', this indicates a system error. Switch the machine off and back on.
To Next PageTo Next PageWhat does 'EEPROM error' mean on Schaerer Coffee Maker?
If your Schaerer Coffee Maker displays an 'EEPROM error', this indicates a system error. Switch the machine off and back on.
Why is the water tank difficult to slide in place on my Schaerer Coffee Joy Coffee Maker?
If the water tank on your Schaerer Coffee Maker is difficult to slide in place, it's likely that the O-ring on the water outlet connector needs to be greased. Grease the O-ring with grease from the accessories.
Why is the brewing unit difficult to pull out and slide back in my Schaerer Coffee Joy Coffee Maker?
If the brewing unit of your Schaerer Coffee Maker is difficult to pull out and slide back in, it might be because the brewing unit is stiff. Remove the brewing unit. There are two nozzles with black sealing rings on the inside of the machine. Grease the sealing rings with grease from the accessories. Put the brewing unit back in place.
What to do if the brewing unit cannot be re-inserted into Schaerer Coffee Maker?
If the brewing unit cannot be re-inserted into your Schaerer Coffee Maker, it's likely in the wrong position. While inserting the brewing unit, readjust it using the multitool until it can be reinserted.
What to do if the brewing unit cannot be pulled out of Schaerer Coffee Joy?
If the brewing unit of your Schaerer Coffee Maker is difficult to pull out, it might be in the wrong position. Readjust the brewing unit using the multitool until it can be pulled out.
What does 'Brewer position switch' mean on Schaerer Coffee Joy Coffee Maker?
If you're experiencing a 'Brewer position switch' error with your Schaerer Coffee Maker, it could be that the brewing unit is not correctly inserted. Check that the brewing unit is correctly seated. Alternatively, the brewing unit might be stiff. Remove the brewing unit. There are two nozzles with black sealing rings on the inside of the machine. Grease the sealing rings with grease from the accessories. Put the brewing unit back in place.
Why does the pump in my Schaerer Coffee Maker make loud noises?
If the pump in your Schaerer Coffee Maker makes loud noises, it might be because there is too much air in the pipes. Dispense a cup of hot water to bleed the pipes.
Why is the milk from my Schaerer Coffee Joy too hot or has bubbles?
If the milk from your Schaerer Coffee Maker is too hot, the quantity is too low, or the milk foam has bubbles, it could be because the milk in the milk container is too warm. Only use pre-cooled milk (3 – 5°C) and cool the milk constantly during use. Also, the wrong milk nozzle might be in use, change the milk nozzle.
Why does the coffee from my Schaerer Coffee Joy Coffee Maker have no crema?
If your Schaerer Coffee Maker is not producing crema, it might be because the coffee is no longer fresh, replace the beans. Alternatively, the grind level could be too coarse, set the grind level to a finer setting.
What to do if clear flow stopped in Schaerer Coffee Joy?
If the clear flow has stopped in your Schaerer Coffee Maker, it could be due to several reasons. First, try dispensing a cup of hot water to bleed the pipes. If that doesn't work, clean the sieve of the water filter, and if the problem persists, change the water filter. Also, the non-return valve at the outlet of the drinking water tank may be contaminated, clean the outlet and the non-return valve with one of the small brushes in the accessories. The brewing unit could be clogged, remove and clean the brewing unit. Finally, the grind level might be too fine; set it to a coarser setting and clean the brewing unit.
General| Bean hopper capacity | 500 g |
|---|---|
| Water tank capacity | 2.5 l |
| Pump pressure | 15 bar |
| Type | Automatic Coffee Machine |
| Power supply | 220-240 V, 50-60 Hz |
