Scheppach BASATO 4 - General Machinery Safety Instructions

16 english
Trouble shooting
Fault Possible cause Solution
Motor does not start a) Nopower
b) Switch,Condenser
c) Electricalextensioncordisdefective
a) Checkmainsconnection
b) Havethemcheckedbyanelectrical
engineer
c) Removetheplugfromthesocket,check
it, and replace if necessary
Saw blade is not
running straight
a) Guidehasbeenwronglyset
b) Wrongsawblade
a) Setthesawbladeguideaccordingto
the operating instructions
b) Selectasawbladeaccordingtothe
operating instructions
Burnmarksappear
on the wood during
the cutting work
a) Bluntsawblade
b) Wrongsawblade
a) Changethesawblade
b) Selectasawbladeaccordingtothe
operating instructions
Saw blade jams
during cutting work
a) Bluntsawblade
b) Depositsonthesawblade
c) Guidehasbeensetpoorly
a) Changethesawblade
b) Cleanthesawblade
c) Setthesawbladeguideaccordingto
the operating instructions