EasyManua.ls Logo

Schiedel CM03 - Declaration of Conformity

Default Icon
99 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19 Declaration of Conformity
Operating Manual 90° ACTUSAFE CMF(S)QT
OM-ENGLISH-Failsafe-QT-16xx-V2.00-2022.03.01
SEC-KF-ENGLISH-V1.04-2021.11.17
19 Declaration of Conformity
(Ex directive, EMV directive and Low voltage directive)
The producer:
SCHIEBEL Antriebstechnik Gesellschaft m.b.H.
Josef-Benc-Gasse 4
A-1230 Wien
herewith confirms that the equipment
electric actuators with integrated control unit model Actusmart and following types
Type ex (r) CM03 II 2 G Ex db eb (mb) II C T4(T6) Gb TÜV-A13ATEX0006X
Type ex (r) CM03 FS II 2 G Ex db eb (mb) II C T4(T6) Gb TÜV-A13ATEX0006X
Type ex (r) CM06 II 2 G Ex db eb (mb) II C T4(T6) Gb TÜV-A13ATEX0006X
Type ex (r) CM06 FS II 2 G Ex db eb (mb) II C T4(T6) Gb TÜV-A13ATEX0006X
meets the requirement of the EC directive:
2014/34/EU
EC Directive for Operation of Equipment in Potentially Explosive Atmospheres
and complies with the following harmonised standards in the version valid at sigature date:
EN 60079-0:2012 EN 60079-1:2014 EN 60079-7:2015
EN ISO 80079-36:2016 EN ISO 80079-37:2016
For the above listed actuators, a type examination certificate TUV A13ATEX0006X, issued by TÜV Austria Services GMBH,
is available.
TÜV Austria Services GmbH A-1230 Wien NB 0408: Type examination certification
FTZU CZ-716 07 Ostrava Radvanice NB 1026: Quality system
FTZU03ATEXQ019
Furthermore, they are consistent with the EC directive
2014/30/EU ( „EMV directive“)
in consideration of the respective operating instructions, and the fulfilment of the Directive has been demonstrated by the
following standards:
EN 61000-6-2:2005 EN 61000-6-4:2014
and are also consistent with the EC-directive:
2014/35/EU („Low voltage directive“)
in consideration of the respective operating instructions, and the fulfilment of the Directive has been demonstrated by the
following standards:
IEC 60204-1:2005 + A1:2008 EN 60529:1991 + A1:2000
Vienna,
(location)
14.2.2018
(date)
.........................................................................
(Klaus Schiebel, general manager)
82

Table of Contents