Basic safety notes
01.00 | CMS | Assembly and operating manual | en | 1553577 11
2.8 Notes on safe operation
Incorrect handling of the personnel
Incorrect handling and assembly may impair the product's safety
and cause serious injuries and considerable material damage.
l
Avoid any manner of working that may interfere with the
function and operational safety of the product.
l
Use the product as intended.
l
Observe the safety notes and assembly instructions.
l
Do not expose the product to any corrosive media. This does
not apply to products that are designed for special
environments.
l
Eliminate any malfunction immediately.
l
Observe the care and maintenance instructions.
l
Observe the current safety, accident prevention and environ-
mental protection regulations regarding the product's applic-
ation field.
2.9 Transport
Handling during transport
Incorrect handling during transport may impair the product's
safety and cause serious injuries and considerable material
damage.
l
When handling heavy weights, use lifting equipment to lift
the product and transport it by appropriate means.
l
Secure the product against falling during transportation and
handling.
l
Stand clear of suspended loads.
2.10 Malfunctions
Behavior in case of malfunctions
l
Immediately remove the product from operation and report
the malfunction to the responsible departments/persons.
l
Order appropriately trained personnel to rectify the
malfunction.
l
Do not recommission the product until the malfunction has
been rectified.
l
Test the product after a malfunction to establish whether it
still functions properly and no increased risks have arisen.
To Next Page
Loading...
