General
01.00 | CMS | Assembly and operating manual | en | 1553577 7
1.2 Warranty
If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following
conditions:
l
Observe the specified maintenance and lubrication intervals
l
Observe the ambient conditions and operating conditions
Parts touching the workpiece and wear parts are not included in
the warranty.
1.3 Accessories
A wide range of accessories are available for this product
For information regarding which accessory articles can be used
with the corresponding product variants, see catalog data sheet.
1.4 Scope of delivery
The scope of delivery includes
l
Manual change head CMS-K or manual change adapter CMS-A
in the version ordered
l
Accessory kit (not with basic version -B)
– Locking screws for radial air feed-throughs (number and
dimensions vary depending on size)
– O-rings for axial feed-through (number and dimensions
vary depending on size)
To Next Page
Loading...
