EU declaration of conformity
01.00 | CMS | Assembly and operating manual | en | 1553577 27
8 EU declaration of conformity
in accordance with Directive 2001/95/EC (General Product Safety).
Manufacturer/
Distributor
SCHUNK SE & Co. KG
Toolholding and workholding | Gripping Technology | Automation
technology
Bahnhofstr. 106 - 134
D-74348 Lauffen/Neckar
We hereby declare that the product described below complies with the requirements of
Directive 2001/95/EC and is safe for use in accordance with these conditions. The declaration
shall be rendered invalid if modifications are made to the product.
Product designation: Manual change system / CMS
Related technical standards and specifications:
EN ISO 12100:2010 Safety of machinery - General principles for design -
Risk assessment and risk reduction
Person authorized to compile the technical documentation:
Stefanie Walter, Address: see manufacturer's address
Signed for and on behalf of: SCHUNK SE & Co. KG
Lauffen/Neckar, June 2023 Dr.-Ing. Manuel Baumeister,
Head of Systems Engineering,
Technology & Innovation
To Next Page
Loading...
