Assembly
01.00 | CMS | Assembly and operating manual | en | 1553577 17
5 Assembly
5.1 Installing and connecting
WARNING
Risk of injury due to improperly carried out assembly!
Improperly carried out assembly work can lead to severe injuries
and property damage.
l
Before beginning work, ensure sufficient assembly clearance.
l
Secure components from falling down or over.
l
Ensure that all work has been carried out in accordance with
the specifications in these instructions.
l
Observe tightening torques.
1. Check the evenness of the mounting surface, }5.2 [/18].
2. Attach the product to the robot, }5.2 [/18].
ð Observe the maximal tightening torque, admissible
screw-in depth and, if necessary, strength class.
3. Mount sensors if necessary, }5.3 [/20].
4. Mount optional modules if necessary, }5.4 [/21]
To Next Page
Loading...
