Schweitzer Engineering Laboratories SEL-700G1 - Table 2.15 Eight Digital Inputs (8 DI) Card Terminal Designations; Table 2.16 Eight Digital Outputs (8 DO) Card Terminal Designations

2.12
SEL-700G Relay Instruction Manual Date Code 20170814
Installation
I/O Configuration
I/O Card (8 DI)
Supported in any nonbase unit slot (Slot C through Slot E), this card has eight
digital inputs. Table 2.15 shows the terminal allocation.
I/O Card (8 DO)
Supported in any nonbase unit slot (Slot C through Slot E), this card has eight
digital outputs. The eight digital outputs are all normally open contact outputs.
Table 2.16 shows the terminal allocation.
Table 2.15 Eight Digital Inputs (8 DI) Card Terminal Designations
Side-Panel
Connections Label
Termin al
Number
Description
a
a
x=3, 4, or 5 (e.g., OUT401, OUT402, etc. if the card was installed in Slot D).
01, 02 INx01, drives INx01 element
03, 04 INx02, drives INx02 element
05, 06 INx03, drives INx03 element
07, 08 INx04, drives INx04 element
09, 10 INx05, drives INx05 element
11, 12 INx06, drives INx06 element
13, 14 INx07, drives INx07 element
15, 16 INx08, drives INx08 element
INPUTS:
08
05
06
02
04
09
03
10
11
12
13
14
15
16
07
01
IN_0 1
IN_02
IN_03
IN_04
IN_05
IN_06
IN_07
IN_08
Table 2.16 Eight Digital Outputs (8 DO) Card Terminal Designations
Side-Panel
Connections Label
Termin al
Number
Description
a
a
x=3, 4, or 5 (e.g., OUT401, OUT402, etc. if the card was installed in Slot D).
01, 02 OUTx01, driven by OUTx01 SELOGIC control
equation
03, 04 OUTx02, driven by OUTx02 SEL
OGIC control
equation
05, 06 OUTx03, driven by OUTx03 SEL
OGIC control
equation
07, 08 OUTx04, driven by OUTx04 SEL
OGIC control
equation
09, 10 OUTx05, driven by OUTx05 SEL
OGIC control
equation
11, 12 OUTx06, driven by OUTx06 SEL
OGIC control
equation
13, 14 OUTx07, driven by OUTx07 SEL
OGIC control
equation
15, 16 OUTx08, driven by OUTx08 SEL
OGIC control
equation