Generating setstop
Screen
no.
Screen
Data displayed
G 11
OFF
IN PROGRESS
24/08/2005 13:16
Generating set stop in progress
Date and time (depending on settings)
Operating mode changeover (switching from Manual Mode to Auto Mode following auto start demand)
Screen
no.
Screen
Data displayed
G 12
Start Demand
AUTO
Do you wish to change
to Auto Mode?
WARNING
Immediate start
OK Esc
Operating mode - operation in Manual Mode
AUTOMATIC start demand
Generating set stop request due to fault or by pressing STOP in Auto Mode
Screen
no.
Screen
Data displayed
G 13
Manual Mode
activated
Do you wish to change
to AUTO mode?
OK Esc
Operating mode - operation in Auto Mode
(generating set in operation)
Warning message for switching to Manual Mode
after the STOP button has been pressed or a fault
has appeared
To Next Page
Loading...
