PUSH
English
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
2) Example 2 -- User PIN for Output 2 :
i) Programming :
20 2 001 1234 #
(a) (b) ( c) (d) (e)
(a) The User PIN is programmed for Output 2
(b) Record an User PIN
(c) Take ID number 001 in Group 2 to store the User PIN, which is one of the IDs in 001-100
(d) Key in User PIN “1234” into the storage location
(e) Press # to confirm and store the “User PIN” into memory, two-beep confirms a valid entry
ii) Operation : (while the system is back to operation mode)
1234 #
(a) (b)
(a) Key in the Private User PIN “1234”
(b) Confirm it with the # key. Output 2 activates
3) Example 3 -- User PIN for Output 3:
i) Programming :
30 2 002 1357 #
(a) (b) (c) (d) (e)
(a) The User PIN is programmed for operating of the Output 3
(b) Record an User PIN
(c) Take the ID number 002 in Group 3 to store the User PIN, which is one of the IDs in 001-100
(d) Key in User PIN “1357” into the storage location
(e) Press # to store "User PIN” into memory, two-beep confirms a valid entry
ii) Operation : (while the system is back to operation mode)
1357 #
(a) (b)
(a) Key in the User PIN “1357”
(b) Confirm it with the # key. Output 3 activates
4) Example 4 -- Delete an User PIN (for O/P 1, 2 or 3) :
i) Delete An User PIN
10 5 User ID #
(a) (b) ( c) (d)
a) Key in the User Group that the User ID belongs to. “10” for the Group 1, “20” for the Group 2, and “30” for the Group 3
b) Key in “5” that is the Command Code for making a deletion here
c) Key in the User ID that stored the User PIN
d) Press the # key. Two-beep confirms a valid entry and the User PIN in that User ID is cleared
5) Example 5 – Clear The Whole Group of Users :
Whole group of users can be cleared with the following command.
10 0999 #
(a) (b) ( c)
a) The User Group 1 – “10 ” is selected to be cleared. “20 ” for Group 2 & “ 30” for Group 3
b) Key in the Group Deletion Command, 0999
c) Confirm the deletion with #. All the User PINs in the Group 1 are cleared. It takes few seconds to a minute to complete
depending on the data stored.
40 Rev. 01 - 05/201167411245
To Next Page
Loading...