EasyManua.ls Logo

SEA PUSH - Close the Programming Mode; Programming Summary Chart

Default Icon
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-8 Digits
PUSH
English
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
The Manner of The Door Opening Alarm:
a) The door is forced to open without using PIN – Alarm
b) The door is opened with Egress Button – Alarm
c) The door is opened with PIN – No Alarm
To prevent confusion of the alarm outputs It is suggested to disable the "Door Forced Open Warning" at Location 80 while "Door
Opening Alarm" function is enabled. If both functions at Location 80 and Location 91 are enabled and are set with different timings,
the system will combine them and will take the longer one for alarm time.
CLOSE THE PROGRAMMING MODE (* *)
Always close programming mode with * * to set system back to normal Operation after programming.
VALIDATION
* * ---- --------------------------- System is back to normal operation mode
PROGRAMMING SUMMARY CHART
User PINs for O/P 1
10
20 User PINs for O/P 2
30
User PINs for O/P 3
NIL10 CODE1 CODE2 CODE3 #
20 CODE1 CODE2 CODE3 #
30 CODE1 CODE2 CODE3 #
NIL
NIL
01
02
4-8 Digits
Super User PIN
Master Code
02 SUPER USER PIN #
01 MASTER CODE # NIL
NIL
CODE 1 - VISITOR ID:
01-50
CODE 2 - VALID PERIOD:
00---One Time
01-99 Hours
CODE 3 - VISITOR CODE:
4-8 Digits
40
Visitor Codes 40 CODE1 CODE2 CODE3 # NIL
CODE ID - O/P 1: 01-50
CODE ID - O/P 2: 01-10
CODE ID - O/P 3: 01-10
DURESS CODE: 4-8 Digits
41
42
43
Duress Code for O/P 1
Duress Code for O/P 2
Duress Code for O/P 3
41 CODE ID DURESS CODE #
42 CODE ID DURESS CODE #
43 CODE ID DURESS CODE #
NIL
NIL
NIL
OUTPUT MODE & TIME:
0--- Start / Stop
1---99999 Seconds,
Momentary
51
52
53
O/P Mode for O/P 1
O/P Mode for O/P 2
O/P Mode for O/P 3
51 O/P MODE & TIME #
53 O/P MODE & TIME #
52 O/P MODE & TIME #
5 Seconds
5 Seconds
5 Seconds
LOCATION FUNCTION
ENTRY LIMITS & CODE
OPTIONS
CODE ENTRY
FACTORY
DEFAULT
CODE 1 -
RECORD/DELETE:
2--- Record an User PIN
5--- Deletion of an User PIN
CODE 2 - USER ID:
000-999---Group 1(10)
001-100---Group 2(20)
001-100---Group 3(30)
CODE 3 - USER PINs:
4-8 Digits
48 Rev. 01 - 05/201167411245

Table of Contents

Related product manuals