Seca 452 - Setting Up the seca connect 103 System; Work steps

Setting up the seca connect 103 System • 17
English
17-10-01-266-002a/07-2018B
4. SETTING UP THE SECA CONNECT 103 SYSTEM
4.1 Work steps
This graphic provides an overview of the steps that are needed to set up an
integrated measuring system with the secaconnect 103. Details can be found
on the following pages.
➔ Work steps
➔ System structure
➔ System requirements
➔ Installing and configuring seca connect 103
Link
measuring device
to seca connect 103
Set up
seca connect 103
Configure and activate
corresponding
integration module
of seca connect 103
Connect EMR system
to seca connect 103
Contact your EMR vendor
for assistance
Define
device name(s)
Recommended content:
-seca modell
-location
-Inventory number
-Network type (WiFi/Ethernet)
External
interface module seca 452
Internal
interface module
WiFi
Ethernet
Prepare data for
measuring device(s):
x Location
x
IP address
x
Connection type
Check availability
of
WIFI Network
Install
seca connect 103
to server
Configure
seca connect 103
Attach
interface module 452
to device
Device type
Make settings for device
in seca connect 103
Adjust settings
at device
Connection
type
Patch
network socket(s)
Configure firewall
Configure Lnterface
of EMR system