Seca 452 - Preparing the Scale

48 • secaconnect 103/seca 452
17-10-01-266-002a/07-2018B
NOTICE!
Incorrect measurement as a result of force shunt
If the accessories are mounted directly to the scale, faulty
measurements can result.
► Do not attach a scanner bracket to the scale.
► Do not attach the
seca 452 interface module to the scale.
Preparing the scale 1. Switch off the scale.
2. Disconnect the power supply unit from the power supply socket.
3. Pull the power cable out of the scale.
4. Only for models
seca 684 and seca 685: Pull the display cable from the
scale.
6 Ethernet cable n/a 1