8 • secaconnect 103/seca 452
17-10-01-266-002a/07-2018B
tention is drawn to the fact that local laws take precedence over the
above-mentioned requirements of standards. In the event of any
queries, please contact your local specialist dealer or Technical Ser-
vice.
► Please have servicing and measuring technology checks performed
every two years.
► Technical modifications may not be made to the device. The device
does not contain any parts for servicing by the user. Only have ser-
vicing and repairs performed by an authorized seca Service partner.
You can find service partners in your area at www.seca.com or by
sending an e-mail to service@seca.com.
► Only use original seca accessories and spare parts, otherwise seca
will not grant any warranty.
CAUTION!
Patient hazard, malfunction
► Keep other electrical medical devices, e.g. high-frequency surgical
devices, a minimum distance of approx. 1 meter away to prevent in-
correct measurements or wireless transmission interference.
► Keep HF devices such as cell phones a minimum distance of ap-
prox. 1 meter away to prevent incorrect measurements or wireless
transmission interference.
► The actual transmission output of HF equipment may require mini-
mum distances of more than 1 meter. Details can be found at
www.seca.com.
Preventing electric shock WARNING!
Electric shock
► Set up devices which can be operated with the electricity supply so
that the power supply socket is within easy reach and the power
supply can be disconnected quickly.
► Ensure that your local power supply matches the details on the de-
vice.
► Connect this device only to a power supply with a protective earth
facility.
► Do not connect the device to a power supply network if there is any
uncertainty about whether the protective earth is functioning. In this
case, use the device exclusively in rechargeable battery mode.
► Do not connect the device to sockets that are switched by an on/off
switch or a dimmer.
► Never touch the power supply cable with wet hands.
► Do not use extension cables or power strips.
► Make sure that cables are not pinched or damaged by sharp edges.
► Make sure that cables do not come into contact with hot objects.
► Do not operate the device at an altitude of more than 3000 m above
sea level.
To Next Page
Loading...
Need help?
General
