Liberty 100 Smart Electricity Meter Technical Reference Manual
Diagnostic Displays in Prepayment Mode
Key 0: NOT USED
No function is allocated to key 0 when the meter is operating in Prepayment mode. A short press of this key will
display ‘Not Used’ as shown below:
8.3 Diagnostic Displays in Default Mode
In this mode keys 3, 7, 8, 9 and 0 are not assigned with any functions hence will display ‘NOT USED’. All other
keys have the same function as in ‘Credit Mode’ (see Section 8.1 Diagnostic Displays in Credit Mode).
To Next Page
Loading...
