Secure Liberty 100 - Table 7: Key 1 Display in Credit Mode

BGX501-767-R02
Liberty 100 Smart Electricity Meter Technical Reference Manual
Page 57 of 116
Error! Not a valid result for
table.Manual Display in Credit
Press key 1 to advance to the next display
Title 4: Previous day usage
(timeout 2 secs)
Followed by value
(timeout 4 secs)
Press key 1 to return to the 1
st
display.
Press key B to scroll back up the display list.
No key press at the end of this display sequence will
cause the auto-cycle display to resume.
The 4
th
set displays yesterdays’ electricity
consumption.
The example shows that 15.6 kWh was used.
Table 7: Key '1' display in Credit mode
Key 2: Current week and previous week’s cost of consumption
A short press of key ‘2’ will initiate the associated display sequence. After each set of information comprising a
title followed by its data, either a four (4) seconds wait or short press of the key will advance the display to the
next set of information as described below.
Title 1: Current week’s cost
(timeout 2 secs)
Followed by value
(timeout 4 secs)
Press key 2 to advance to the next display
The 1
st
set of display associated with key 2 indicating
the cost of electricity used in the current week.
The example shows that £11.78 is the current cost of
electricity used.
Title 2: Previous week’s cost
(timeout 2 secs)
Followed by value
(timeout 4 secs)
The 2
nd
set display the cost of electricity used in the
previous week (Monday to Sunday).
The example shows that £11.78 is the cost of
electricity used.