Secure Liberty 100 - Table 18: Key 3 Display in Prepayment Mode

Page 74 of 116
Liberty 100 Smart Electricity Meter Technical Reference Manual
BGX501-767-R02
Manual Display in Prepayment Mode
Followed by value
(timeout 4 secs)
Press key 3 to return to the 1
st
display.
Press key B to scroll back up the display list.
No key press at the end of this display sequence will
cause the auto-cycle display to resume.
Table 18: Key '3' display in Prepayment mode
Key 4: Historical monthly consumption data
A short press of key ‘4’ will initiate the associated display sequence. After each set of information comprising a
title followed by its data, either a four (4) seconds wait or short press of the key will advance the display to the
next set of information as described below.
The display will scroll forward through tweleve (12) months historical consumption data starting with the last
month which is the same as the ‘LAST MONTH’ in the above Key 3 sequence. For example, if the current
month is ‘August’ the last month will be ‘July’ so the data sequence will begin from ‘July’ and end with ‘August’.
Title 1: Historical monthly consumption data
(timeout 2 secs)
Press key 4 to advance to the next display
The 1
st
display associated with key 4 indicating that
the key is assigned to display historical monthly
consumption for the past twelve (12) months.
Title 2: Last month’s consumption and its cost
(timeout 2 secs)
Followed by value
(timeout 4 secs)
Followed by value
(timeout 4 secs)
Press key 4 to advance to the next display
The 2
nd
set displays last month’s consumption.
The example shows that 15.6 kWh was used last
month and its associated cost was £11.78.