Secure Liberty 100 - Financial Display; Display Timing; Table 2: Interpretation of LCD Icons

Page 16 of 116
Liberty 100 Smart Electricity Meter Technical Reference Manual
BGX501-767-R02
Supply READY icon is displayed
when the user is allowed to restore the
supply.
Supply READY
Table 2: Interpretation of LCD icons
3.3.2 Financial Display
Financial information is displayed in pounds and pence. Most numerical displays use the decimal points
predefined in the display graphics as shown below:
Displays with text on the right-hand side will use a hyphen (‘–’) as a decimal point. For example, the numeric
display in the following example should be read as ‘000.000 pence’.
3.3.3 Display Timing
When the meter is powered, its display will cycle through a sequence of information by default. The keypad can
be used to view specific information. Display timings are preconfigured for each data item in a display sequence
with each item being preceded by a relevant title as shown in the following examples.
Auto Scroll display timing:
In auto scrolling display mode, the title and data are each displayed for two (2) seconds. After completing a
cycle, the display will enter sleep mode. Auto display is resumed by pressing key ‘B’ from sleep mode.
Displayed for
2
seconds
Displayed for
2
seconds
Manual display timing:
In manual mode, a title is displayed for two (2) seconds followed by the data for four (4) seconds followed by the
next set of information. At the end of a complete cycle the display will return to its default auto scrolling display
mode.
Displayed for 2 seconds
Displayed for 4 seconds
Note: Default configurations in Auto Scroll and Manual Mode displays for Credit, Prepayment and Default
operating modes are detailed in Annexe-I: Meter Displays.