Secure Liberty 100 - Annexe-I: Meter Displays; Auto Scroll Display in Credit Mode; Figure 18: Credit Mode Auto Scroll Display Cycle; Table 6: Auto Scroll Display in Credit Mode

BGX501-767-R02
Liberty 100 Smart Electricity Meter Technical Reference Manual
Page 55 of 116
7 Annexe-I: Meter Displays
This section illustrates the displays that can be configured in the Liberty 100 meter operating in different modes.
7.1 Auto Scroll Display in Credit Mode
The default display will show pertinent information relating to the meter’s credit mode of operation. For each
display the timeout is two (2) seconds. The following display cycle is configured by default when the meter is
operating in ‘Credit’ mode. These can be configured as per energy retailer’s requirement.
Figure 18: Credit mode auto scroll display cycle
Operating mode:
Followed by
The 1
st
display indicating the meter is currently operating in
‘Credit’ mode.
Title: Current usage
Followed by value
Followed by
The 2
nd
display indicating the user’s total electricity
consumption since the last billing date.
The example display shows that 78.1 kWh have been used.
Title: Current cost
Followed by value
The 3
rd
display indicating the total cost of electricity
consumed since the last billing date.
The example display shows that £51.00 is the current bill
amount.
Table 6: Auto scroll display in Credit mode