Secure Liberty 100 - Table 19: Key 4 Display in Prepayment Mode

BGX501-767-R02
Liberty 100 Smart Electricity Meter Technical Reference Manual
Page 75 of 116
Manual Display in Prepayment Mode
… … … … … … … … … … … … …
… … … … … … … … … … … … …
Press key 4 to advance to the next display
The displays will continue to cycle through each
previous month’s consumption data.
Title 13: Consumption and cost in ‘August’
(timeout 2 secs)
Followed by value
(timeout 4 secs)
Followed by value
Press key 4 to return to the 1
st
display.
Press key B to scroll back up the display list.
No key press at the end of this display sequence will
cause the auto-cycle display to resume.
The last display in the sequence indicating
consumption data in the month of ‘August’.
The example shows that 15.6 kWh was used in the
month and its associated cost was £11.78.
Table 19: Key '4' display in Prepayment mode
Key 5: Debt account information
A short press of key ‘5’ will initiate the associated display sequence. After each set of information comprising a
title followed by its data, either a four (4) seconds wait or short press of the key will advance the display to the
next set of information as described below.
Title: Debt account information
(timeout 2 secs)
Press key 5 to advance to the next display.
The displays associated with key 5 indicating debt
account information. Refer to Section 5.5.5 ‘Debt
Recovery Methods’ for further details.
Title: Payment based debt register
(timeout 2 secs)
Followed by value
If payment based debt deduction method is
configured in the meter then PAYG DEBT is
displayed here followed by the outstanding debt
amount and the percentage of debt to be deducted
from the credit added by the customer.