Secure Liberty 100 - Table 16: Key 1 Display in Prepayment Mode

Page 72 of 116
Liberty 100 Smart Electricity Meter Technical Reference Manual
BGX501-767-R02
Manual Display in Prepayment Mode
Press key 1 to advance to the next display
Title 3: Current day usage
(timeout 2 secs)
Followed by value
(timeout 4 secs)
Press key 1 to advance to the next display
The 3
rd
set displays electricity consumption today
since midnight.
The example shows that 8.5 kWh has been used.
Title 4: Previous day usage
(timeout 2 secs)
Followed by value
(timeout 4 secs)
Press key 1 to return to the 1
st
display.
Press key B to scroll back up the display list.
No key press at the end of this display sequence will
cause the auto-cycle display to resume.
The 4
th
set displays yesterday’s electricity
consumption.
The example shows that 15.6 kWh was used.
Table 16: Key '1' display in Prepayment mode
Key 2: Current week and previous week’s cost of consumption
A short press of key ‘2’ will initiate the associated display sequence. After each set of information comprising a
title followed by its data, either a four (4) seconds wait or short press of the key will advance the display to the
next set of information as described below.
Title 1: Current week’s cost
(timeout 2 secs)
Followed by value
The 1
st
set of displays associated with key 2
indicating the cost of electricity used in the current
week.
The example shows that £11.78 was the cost of
electricity used.