14
ASSEMBLY AND INSTALLATION
6
● Perform assembly work by following the procedure herein stated. Failure to
comply with the instructions can cause electric shock
● Perform assembling as per this Manual. Since this is a complex machine, incorrect
assembling can cause an electric shock, machine damage and/or improper
functioning as per specied performance
● When assembling, more than one person is required. Depending on the assembly
work, there are some cases in which working by one person alone can cause
personal injury or parts damage
● Ensure that connectors are properly connected. Improper connections can
cause electric shock
● Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a risk of re
● This work should be carried out by Site Maintenance Personnel or other qualied
professionals. Work performed by non-technical personnel can cause a severe
accident such as electric shock. Failing to comply with this instruction can
cause a severe accident such as electric shock to the player during operation.
If no one with proper technological expertise is available, request service from
the ofce indicated in this document or the point of purchase so as to ensure
safety
● Provide sufcient space so that assembling can be performed. Performing work
in places with narrow space or low ceiling may cause an accident and assembly
work to be difcult
● To perform work safely and avoid serious accident such as the cabinet falling
down, do not perform work in places where step-like grade differences, a ditch,
or slope exist
● Do not leave power cords or ground wires exposed in areas of heavy foot trafc.
Doing so may cause them to become damaged, possibly resulting in electric
shock and/or short circuits. When laying wiring across the oor, always use
safety covers to protect the wires (wiring diameter: power cable - approx. φ 8)
● Have a ashlight or another supplementary lighting unit available while working.
With indoor lighting alone, the cabinet interior may be too dark. Working without
proper lighting can lead to accidents. It also hinders proper work performance
● The cabinet has ventilation ports. Be sure not to block them. If they are blocked,
heat can build up, leading to re. This can also accelerate wearing of parts and
malfunctions
● Secure ample ventilation space around the cabinet. If heat builds up, there
could be accidents associated with heat or smoke generation
● This product does not use any connectors other than those connected to and
used by the Game Board when it leaves the factory. Do not needlessly con-
nect wires to unused connectors. This could lead to overheating, generation of
smoke and burn related injuries
6
ASSEMBLYANDINSTALLATION
To Next Page
Loading...
Need help?
General
