Sega MIB - Definition of Site Maintenance Personnel and Qualified Individuals; Site Maintenance Personnel; Other Qualified Professionals; Electrical & Mechanical Specifications

iv
INTRODUCTION
Parts replacement, maintenance inspections and troubleshooting should be carried out by Site Maintenance
Personnel or other qualied professionals. This Manual includes directions for potentially dangerous procedures
which should only be carried out by professionals with the appropriate specialised knowledge.
The Site Maintenance Personnel or other qualied professionals mentioned in this Manual are dened as follows:
Site Maintenance Personnel:
Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the
supervision of the owner/operator of this product to maintain machines within amusement facilities or similar
premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/
expendable parts.
Activities to be carried out by Site Maintenance Personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.
Other qualied professionals:
Persons employed by amusement equipment manufacturers, or involved in design, production, testing or
maintenance of amusement equipment. The individual should have either graduated from technical school or hold
similar qualications in electrical/electronics/mechanical engineering.
Activities to be carried out by other qualied professionals:
Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.
Denitionof'SiteMaintenencePersonnel’orOtherQualiedIndividualsDenitionof'SiteMaintenencePersonnel’orOtherQualiedIndividuals
Electrical&MechanicalSpecicationsElectrical&MechanicalSpecications
Procedures not described in this Manual or marked as ‘to be carried out by Site
Maintenance Personnel or other qualied professionals’ should not be carried
out by personnel without the necessary skill or technological experience. Work
carried out by unqualied persons may cause serious accidents, including
electrocution.
Standard Cabinet
Machine Dimensions: 1.88m (74in) [Width] x 1.6m (63in) [Depth]
Machine Height: 2.53m (99.6in) (Installed) - 2.08m (81.9in) [without Billboard]
Machine Weight: 408kg Approx (Installed)
Power (Maximum Current): -250w-
Rating: 115-240VAC
Fuse Rating: 3.15A
SPECIFICATIONS